H10 and X01 quick start guide

Power on/off

  1. On the H10 headband, press and hold the middle button for 3 sec.
  2. On the X01 transmitter, press and hold the button for 3 sec.

W+ Link mode

Pairing W+ Link for wireless ultra-low latency and lossless audio:

  1. Make sure the slide switch on the H10 headband is set to W+ Link mode (white).
  2. On the H10 headband, when powered on, press and hold the top and bottom button for 3 sec to enter pairing mode (LED blinking fast).
  3. On the X01 transmitter, when powered on, double press the button to enter pairing mode (LEDs blinking fast).
  4. Pairing is successful when the LED on H10 and X01 are both solid white.

Please see pairing video here.

Bluetooth mode

Pairing Bluetooth:

  1. Make sure the slide switch on H10 headband is set to Bluetooth© mode (blue).
  2. On the H10 headband, when powered on, press and hold the top and bottom button for 3 sec to enter pairing mode (LED blinking fast).
  3. Activate pairing mode on your connecting device and look for "AIAIAI TMA-2 (H10)".
  4. Pairing is succesful when the LED on the H10 headband is solid blue.

Can’t find what you’re looking for?